Attention

Version 3 is now the current version of MathJax. This document is for version 2.

# Loading and Configuring MathJax¶

You load MathJax into a web page by including its main JavaScript file
into the page. That is done via a `<script>`

tag that links to the
`MathJax.js`

file. To do that, place the following line in the `<head>`

section of your document:

```
<script type="text/javascript" src="path-to-MathJax/MathJax.js"></script>
```

where `path-to-MathJax`

is replaced by the URL of the copy of MathJax
that you are loading. For example, if you are using cdnjs as a
distributed network service, the tag might be

```
<script type="text/javascript"
src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.7/MathJax.js">
</script>
```

If you have installed MathJax yourself, `path-to-MathJax`

will be the
location of MathJax on your server, or (if you are using MathJax locally
rather than through a server) the location of that directory on your hard
disk. For example, if the MathJax directory is at the top level of your
web server’s directory hierarchy, you might use

```
<script type="text/javascript" src="/MathJax/MathJax.js"></script>
```

to load MathJax.

If you install MathJax on a server in a domain that is different from the one containing the page that will load MathJax, then there are issues involved in doing so that you need to take into consideration. See the Notes About Shared Servers for more details.

When you load MathJax, it is common to request a specific configuration file as discussed in the section on Using a Configuration File below, and in more detail in the Common Configurations section. A typical invocation of MathJax would be

```
<script type="text/javascript"
src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.7/MathJax.js?config=TeX-AMS-MML_CHTML">
</script>
```

which loads MathJax with a configuration file that includes everything
you need in order to enter mathematics in either TeX, LaTeX, or MathML
notation, and produces output using HTML-with-CSS otherwise. If you
**don’t** load an explicit configuration file, you will need to
include an in-line configuration block in order to tell MathJax how to
read and display the mathematics on your pages. See the section below
on Using In-line Configuration Options for
details.

It is best to load MathJax in the document’s `<head>`

block, but it
is also possible to load MathJax into the `<body>`

section, if
needed. If you do this, load it as early as possible, as
MathJax will begin to load its components as soon as it is included in
the page, and that will help speed up the processing of the
mathematics on your page. MathJax does expect there to be a
`<head>`

section to the document, however, so be sure there is one
if you are loading MathJax in the `<body>`

.

It is also possible to load MathJax dynamically after the page has been prepared, for example, via a GreaseMonkey script, or using a specially prepared bookmarklet. This is an advanced topic, however; see Loading MathJax Dynamically for more details.

## Loading MathJax from a CDN¶

MathJax is available as a web service from various free CDN providers, so you can obtain MathJax from there without needing to install it on your own server.

Warning

We retired our self-hosted CDN at `cdn.mathjax.org`

in April, 2017.
We recommend using cdnjs.com which uses the same provider.
The use of `cdn.mathjax.org`

was governed by its terms of service.

A CDN is part of a distributed “cloud” network, so it is handled by servers around the world. That means that you should get access to a server geographically near you, for a fast, reliable connection. Most CDN services offer several versions of MathJax. For example, cdnjs hosts all tagged versions since v1.1 so you can link to the version you prefer.

The URL that you use to obtain MathJax determines the version that you get. For example, cdnjs uses a URL that includes the version tag so you can load the current version via

```
https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.7/MathJax.js # the 2.7.7 release
```

Pre-releases are also available on cdnjs.

When you use a specific version number, you will always get that version regardless of whether newer versions of MathJax are available. That means you will need to manually update your web pages to refer to the newer version when one is available.

Some CDN providers on our list offer a “rolling release” link, i.e, a link that updates to each newer version of MathJax upon release. For most of the others, if you would like to always use the latest version of MathJax, you can use

```
https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.7/latest.js # the latest release
```

and MathJax will look up the latest version and load that (regardless of the version number referenced in your URL). That means you will not have to update your pages as new versions are released, but it also means that if there are any changes that are not backward compatible, something on your page may no longer work as it used to.

Note

If you wish to use the development version of
MathJax, you will need to install your own copy; see Installing
and Testing MathJax for information on how to do that.
Alternatively, you can load the `develop`

branch via rawgit.com <https://rawgit.com>.

Note

If you wish to use a CDN but use your own configuration file rather than one of the pre-defined ones, see the information at the end of the Using a Local Configuration File section below.

## Configuring MathJax¶

There are two ways to configure MathJax: via a configuration file, or by including configuration commands within the web page itself. These can be used independently, or in combination. For example, you can load a main pre-defined configuration file, but include in-line commands to adjust the configuration to your needs.

Note that you must use at least one of these two forms of configuration.
Unlike MathJax v1.0, version 1.1 and higher does not load a default
configuration file. If you have been using version 1.0’s
`config/MathJax.js`

for your configuration, you will need to load that
configuration file explicitly via a `config`

parameter, as described
below.

## Using a configuration file¶

The easiest way to configure MathJax is to use a configuration file.
MathJax comes with a number of pre-defined and pre-combined configuration files,
which are stored in the `MathJax/config`

directory.
The contents of these
files are explained in more detail in the Common Configurations section.

### Considerations for using combined configuration files¶

Usually, MathJax loads its components only when they are needed, but each component will require a separate file to be loaded, and that can cause delays before the mathematics is displayed. The combined configuration files load the majority of the needed files all as one large file, reducing the number of network requests that are needed. That means you will probably be getting the components that MathJax needs faster than you would without the combined file, but you may be loading components that are never actually used; that is the trade off.

Each of the combined configuration files comes in two flavors: the
ones listed in the Common Configurations section, which only configure the output
processors but don’t include their main code, and a “full” version, that
also includes the complete output processors. For example, with
`TeX-AMS_CHTML.js`

and `TeX-AMS_CHTML-full.js`

, the latter
includes the complete CommonHTML output processor. The “full”
configuration files are substantially larger (on the order of 70KB
more), so you need to decide whether it is worth loading the full
configuration for your pages.

If most of your pages include mathematics, then it is to your advantage to load the full version, but if you are including MathJax in a theme file for a blog or wiki that only includes mathematics occasionally, then perhaps it is better to use the standard configuration instead, in which case the output processors are only loaded when they are actually needed, saving the loading of 70KB for pages that don’t. Of course, if your server is configured to compress the files it sends, the difference between the two is considerably reduced. Furthermore, most browsers will cache the JavaScript they receive, so the download cost should only occur on the first page a user views, so it may be best to use the “full” version after all. Note, however, that older mobile devices sometimes have limits on the size of files that they cache, so they may be forced to download the configuration on every page. You need to keep these issues in mind as you decide on which configuration to use.

To load a configuration file, use `config=filename`

(where
`filename`

is one of the names listed in Common Configurations without the `.js`

) as a parameter to the
URL of the `MathJax.js`

file. For example

```
<script type="text/javascript"
src="https://example.com/mathjax/MathJax.js?config=TeX-AMS-MML_CHTML">
</script>
```

loads the `config/TeX-AMS-MML_CHTML.js`

configuration file from the
`/mathjax`

directry on your server.

You can include more than one configuration file by separating them with
commas. For example, if you have a locally defined configuration file
called `MathJax/config/local/local.js`

that modifies the settings for the
`TeX-AMS_HML`

configuration, defines some new TeX macros, and so on, you
can use

```
<script type="text/javascript"
src="https://example.com/mathjax/MathJax.js?config=TeX-AMS_CHTML,local/local">
</script>
```

to first load the main configuration, then the local modifications.

## Using a local configuration file with a CDN¶

You can load MathJax from a CDN provider but still use a
configuration from your own local server. For example, suppose you
have a configuration file called `local.js`

on your own server, in a
directory called `MathJax/config/local`

. Then you can load MathJax
from a CDN and still use your configuration file as follows:

```
<script type="text/javascript"
src="https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.7/MathJax.js?config=TeX-AMS_HTML,http://myserver.com/MathJax/config/local/local.js">
</script>
```

Because the `local.js`

file is not on the CDN server, you must give
the complete URL to the local configuration file. Note that you also
have to edit the `loadComplete()`

call that is at the bottom of
the configuration file to change it from
`[MathJax]/config/local/local.js`

to the complete URL as you give it
in the `config`

parameter. In the example above, it would be

```
MathJax.Ajax.loadComplete("http://myserver.com/MathJax/config/local/local.js");
```

That is because the `[MathJax]`

in the original URL refers to the
root directory where `MathJax.js`

was loaded, which is on the CDN,
not your local server, and so you need to tell MathJax the actual
location of your configuration file.

## Using in-line configuration options¶

The second way to configure MathJax is through in-line configuration,
which puts the configuration options within the web page itself. The use
of in-line configuration with MathJax requires two separate `<script>`

tags: one for specifying the configuration settings and one for loading of
MathJax. Because MathJax starts its configuration process as soon as it is
loaded, the configuration script must come **before** the script tag that
loads `MathJax.js`

itself. You do this by including a `<script>`

with
`type="text/x-mathjax-config"`

whose content will be run when
MathJax performs its configuration. Generally, this script will
include a `MathJax.Hub.Config()`

call to perform MathJax
configuration, but it can also include other MathJax commands, such as
registering signal actions, or any JavaScript commands that you want.
You can have as many such script tags as you need, and MathJax will
process them in the order in which they appear in the document.

For instance,

```
<script type="text/x-mathjax-config">
MathJax.Hub.Config({
extensions: ["tex2jax.js"],
jax: ["input/TeX", "output/HTML-CSS"],
tex2jax: {
inlineMath: [ ['$','$'], ["\\(","\\)"] ],
displayMath: [ ['$$','$$'], ["\\[","\\]"] ],
processEscapes: true
},
"HTML-CSS": { fonts: ["TeX"] }
});
</script>
<script type="text/javascript" src="path-to-MathJax/MathJax.js">
</script>
```

This example includes the tex2jax preprocessor and configures it to use
both the standard TeX and LaTeX math delimiters. It uses
the TeX input processor and the HTML-CSS output processor, and forces the
HTML-CSS processor to use the TeX fonts rather than other locally installed
fonts (e.g., STIX fonts). See the configuration options section (or the comments in the `config/default.js`

file) for more information about the configuration options that you can
include in the `MathJax.Hub.Config()`

call. This
configuration does **not** load any pre-defined configuration file.

Note that you can combine in-line configuration with file-based
configuration; simply include `text/x-mathjax-config`

scripts as above,
but also include `config=filename`

when you load the `MathJax.js`

file. For example, the tex2jax preprocessor does **not** enable the TeX
single-dollar in-line math delimiters by default. You can load one of the
pre-defined configuration files that includes the TeX preprocessor, and use
an in-line configuration block to enable the single-dollar signs, as
in this example:

```
<script type="text/x-mathjax-config">
MathJax.Hub.Config({
tex2jax: {
inlineMath: [ ['$','$'], ["\\(","\\)"] ],
processEscapes: true
}
});
</script>
<script type="text/javascript" src="path-to-MathJax/MathJax.js?config=TeX-AMS_HTML">
</script>
```

## Using plain JavaScript¶

Starting with MathJax version 2.3, it is possible to set `window.MathJax`

to
a configuration object in any JavaScript code before MathJax’s startup.
MathJax will then use that object for its initial configuration. For instance
the previous example becomes:

```
<script type="text/javascript">
window.MathJax = {
tex2jax: {
inlineMath: [ ['$','$'], ["\\(","\\)"] ],
processEscapes: true
}
};
</script>
<script type="text/javascript" src="path-to-MathJax/MathJax.js?config=TeX-AMS_HTML">
</script>
```

Similarly to scripts with the custom type `text/x-mathjax-config`

, you can
enter arbitrary code to execute during the configuration phase. You just
need to put that code in an `AuthorInit`

function:

```
<script type="text/javascript">
window.MathJax = {
AuthorInit: function () {
... initialization code ...
}
};
</script>
```

Note that this initialization code runs before the
`MathJax.Hub.queue`

is set up, so if you want to queue additional
actions during the AuthorInit function, use

```
<script type="text/javascript">
window.MathJax = {
AuthorInit: function () {
MathJax.Hub.Register.StartupHook("Begin",function () {
MathJax.Hub.Queue(
... your actions here ...
)
});
}
};
</script>
```

## Configuring MathJax after it is loaded¶

Because MathJax begins its configuration process immediately after it is
loaded (so that it can start loading files as quickly as it can), the
configuration blocks for MathJax must come before `MathJax.js`

is loaded,
so they will be available to MathJax when it starts up. There are
situations, however, when you might want to put off configuring MathJax
until later in the page.

One such situation is when you have a site that loads MathJax as part of a
theme or template, but want to be able to modify the configuration on
specific pages of the site. To accomplish this, you need to ask MathJax
to delay its startup configuration until some later time. MathJax uses
the `delayStartupUntil`

parameter to control the timing of the startup
sequence. By default, it is set to `none`

, meaning there is no delay
and MathJax starts configuration right away.

You can set `delayStartupUntil=onload`

in order to prevent MathJax from
continuing its startup process until the page’s onLoad handler fires. This
allows MathJax to find the `text/x-mathjax-config`

blocks that occur
anywhere on the page, not just the ones that appear above the `<script>`

that loads `MathJax.js`

. It also means that MathJax will not begin
loading any of the files that it needs until then as well, which may delay
the displaying of your mathematics, since the onLoad handler doesn’t
execute until all the images and other media are available. (If you have
used a combined configuration file, however, it already includes all the
main files that MathJax needs, so there is not much loss in delaying the
startup.)

You can set `delayStartupUntil=configured`

in order to delay the
startup configuration until the `MathJax.Hub.Configured()`

method is called. This allows you to delay startup until later on the
page, but then restart the MathJax configuration process as soon as
possible rather than waiting for the entire page to load. For
example, you could use

```
<script type="text/javascript"
src="path-to-MathJax/MathJax.js?config=TeX-AMS-MML_HTMLorMML&delayStartupUntil=configured">
</script>
```

in your theme’s header file, and

```
<script type="text/javascript">
MathJax.Hub.Configured()
</script>
```

in its footer, so that MathJax will delay setting up until the footer
is reached, but will not have to wait until images and other files are
loaded. In this way, if you have `text/x-mathjax-config`

script
tags within the main body of the document, MathJax will read and
process those before continuing its startup. In this way you can use
a default configuration that can be modified on a page-by-page basis.

Note that `MathJax.Hub.Configured()`

is not called by MathJax;
you must make that call somewhere within the page yourself after the
configuration blocks are set up. If you do not execute this function,
MathJax will not process any of the math on the page.

## Additional query string options¶

MathJax will check the query string for several other parameters (beyond the `config`

and `delayStartupUntil`

parameter).

`locale=...`

(e.g.,`locale=fr`

) determines the localization for the MathJax Menu.`noContrib`

disables the`[Contrib]`

prefix path for loading- third-party extensions from the (retired) MathJax CDN.

`noDOMContentEvent`

(obsolete) provided a work around for using- the
`DOMContentLoaded`

event to start MathJax’s processing phase

`NoMathPlayer`

(obsolete) prevents MathJax from trying to use MathPlayer even if MathPlayer is available.

## Details of the MathJax configuration process¶

Since there are a number of different ways to configure MathJax, it is important to know how they interact. The configuration actions are the following:

- Execute
`AuthorInit()`

from in-line`MathJax = {...}`

. - Process any configuration file explicitly specified as a script
parameter via
`config=`

. - Perform author configuration from in-line
`MathJax = {...}`

- Process the in-line script body (deprecated), if present.
- If delayed startup is requested, wait for the indicated signal.
- Process
`text/x-mathjax-config`

config blocks. - Process any config files queued in the configuration’s config array by earlier config code.

Note that `text/x-mathjax-config`

script blocks must either precede
the `MathJax.js`

script element, or you must request a delayed
startup. Otherwise, blocks that follow the `MathJax.js`

script
element may or may not be available when MathJax runs, and
browser-dependent erratic behavior will result. Similarly,
`window.MathJax`

must be created before `MathJax.js`

is loaded.
If you set the `MathJax`

variable afterward, you may disable
MathJax entirely!